Benson Energy Saving Technology

LED replace 4 pin 2G7 9W

2G7 LED, 5W 2G7 LED Light

LED replace 4 pin 2G7 9W

Product Model: ECGsmart 2G7 5W LED Lamp

The LED CFL is designed to replace traditional 4 pin cap PL-S, Dulux SE or Biax SE 9W CFL. Electronic ballast compatible technology applies into ECGsmart series LED lamps. No rewiring for fixture. No bypassing to ballast. ECGsmart 2G7 5W LED CFL bulb ...
Add Inquiry
Features

The LED CFL is designed to replace traditional 4 pin cap PL-S, Dulux SE or Biax SE 9W CFL. Electronic ballast compatible technology applies into ECGsmart series LED lamps. No rewiring for fixture. No bypassing to ballast. ECGsmart 2G7 5W LED CFL bulb comes with 4 pin 2G7 base and available in various correlated color temperature (CCT). ECGsmart 2G7 series LED bulbs can operate on both electronic gear and external LED driver. With built-in fuse protection, over current protection, over temperature protection, electric arc as well as spark prevention, the safety of ballast compatible LED CFL can be guaranteed.

(Model: ECGsmart 2G7 5W LED Lamp)
Directly replace old 4 pin cap PL-S, Dulux SE or Biax SE 9W CFL
Work with ECG ballast in existing luminaire.
Extremely energy-saving
Long service life of up to 50,000 hours
New innovative design
Good Heat Dissipation
Dimmable with external LED driver
No bending
No hazardous substances
Note: Not applicable to AC mains (85V~265V) or conventional control gear(CCG).

The LED CFL is designed to replace traditional 4 pin cap PL-S, Dulux SE or Biax SE 9W CFL. Electronic ballast compatible technology applies into ECGsmart series LED lamps. No rewiring for fixture. No bypassing to ballast. ECGsmart 2G7 5W LED CFL bulb comes with 4 pin 2G7 base and available in various correlated color temperature (CCT). ECGsmart 2G7 series LED bulbs can operate on both electronic gear and external LED driver. With built-in fuse protection, over current protection, over temperature protection, electric arc as well as spark prevention, the safety of ballast compatible LED CFL can be guaranteed.

ECGsmart 2G7 series LED bulbs are not applicable to AC mains voltage (85V~265V) or magnetic ballast (CCG). If you need direct mains voltage for 4 pin 2G7 LED bulbs, please check out our AC-in 2G7 LED series. If you have any questions, more than welcome to contact with our lighting specialist to know more about our electronic ballast compatible LED solutions.

Specifications
Descriptions Value
Direct Replacement Target Old 2G7 9W DULUX F lamp
Driver Compatibility Electronic ballast, LED driver
Ballast Driving Voltage Upon ballast output
CC LED Driver Output Voltage 28V DC
CC LED Driver Output Current 160mA DC
Wattage 5W
Conventional Wattage Equivalent 9W PLS or DULUX S/E CFL
Base Cap 4 pin 2G7
Life Span (Hours) 50000 hrs
Beam Angle (Degrees) 140
Lumens per Watt 130 lm/W
Lumens 650 lm
End cap type Aluminum or plastic
PC cover Clear / Milky
Length 149 mm
Color Rendering Index (CRI) Ra > 82
Color Temperature (CCT) 2700K ~ 6000K
Specifications
Order number Direct Retrofit Target
ES-2G7-5W27K-AL traditional 4 pin 2G7 9W 2700K PLS CFL
ES-2G7-5W30K-AL traditional 4 pin 2G7 9W 3000K PLS CFL
ES-2G7-5W40K-AL traditional 4 pin 2G7 9W 4000K PLS CFL
ES-2G7-5W50K-AL traditional 4 pin 2G7 9W 5000K PLS CFL
ES-2G7-5W60K-AL traditional 4 pin 2G7 9W 6000K PLS CFL
Warning for usage
.Only be installed by a qualified electrician and lighting technician or specialists, and in accordance with all the applicable installation codes. Switch off all power to fixture before conducting any inspection, installation, maintenance, or removal. Always contact ground lead to fixture in accordance with local and/or national electrical codes, where applicable. Failure to do so may result in serious personal injury.
.Operate in fixtures that provide the free flow of air around the lamp. In enclosed fixtures, ensure the lamp has enough space for heat dissipation. This will ensure lumen maintenance and extend its service life. When products are used in outdoor fixtures, ensure the space is waterproof and well-ventilated.