Benson Energy Saving Technology

Emergency Lighting Conversion Kits – Basic Conversion

Emergency lighting LED Driver, Emergency lighting LED Driver

Emergency Lighting Conversion Kits – Basic Conversion

Produkt-Bezeichnung: BSA-7W-EM-48V180-CH

BSA-7W-EM-48V180-CH, is a high-quality emergency lighting LED driver designed to suite a wide range of retrofit LED ...
Add Inquiry
Produktvorteile

Features

Protections: Short circuit / Over current / Over voltage / Over temperature / Hot Swap
Emergency lighting LED Conversion kits for 25...48V Volt LED loads/light sources/ applications
Automatic Battery Recharge Circuit
Battery Discharge Circuit
Operated with Maintenance-free long-life lithium-ion battery 3.6V/7.2V.
Charge LED indicator and Manual push-in switch bottom
5 year warranty

 

Product Benefits

Conversion Kits for BEST ECGsmart T5 retrofit LED short tubes 136mm, 212mm, 288mm, 517mm and CFL LED downlights to emergency luminaires
Easy Installation
Including Charge LED indicator & Test bottom
Operated with Maintenance-free long-life BEST match lithium-ion batter with 3h battery discharge or customized time

 

BSA-7W-EM-48V180-CH, is a high-quality emergency lighting LED driver designed to suite a wide range of retrofit LED tubes and applications. A 3-hour standard switchable emergency lighting LED conversion kit is designed to work with lithium-ion batteries and is available for the 25...48V Volt LED loads/light sources/applications.

The driver automatically adjusts the output current to provide the best match between the battery and the load, providing half/maximum illumination.

The conversion kits has been tested for safety and complies with the requirements of national and international regulations.

Emergency Lighting Conversion Kits – Basic Conversion
Technical Data
Conversion kits –
Emergency LED Driver
BSA-7W-EM-48V180-CH
Nominal Voltage 100...220VAC Max. 260V AC
Mains Frequency 50...60Hz
Nominal Output Voltage 25V...48VDC
Nominal Output Current 160mA Max.170mA
 
Dimension(L*W*H) 123.47mm*35.4mm*21.4mm
Mounting hole space, length D5.1mm, 110.99mm
Product Weight 70g (not including battery)
Ambient temperature range -40...+70 °
Type of protection IP20
Dimmable No
 
Input Wire cross-section 0.5...1.5mm² / 20...16 AWG
Output Wire cross-section 0.5...1.5mm² / 20...16 AWG
Type Wago, solid wire
Type of emergency operation test Manual test bottom
LED Charge Indicator Green light
BATTERY
Type of Battery Lithium ion
Model See Datasheet
Battery Size See Datasheet
Nominal Voltage of battery See Datasheet
Nominal Capacity of battery See Datasheet
Battery Charging time 24 hrs or customized
Standards CE, RoHs
Retrofit LED tubes/lamps
ECGsmart T5 short series LED 136mm, 212mm, 288mm, 517mm
ECGsmart 2G7 LED 3W, 4W, 5W, 6W
G24q LED lamp 5W, 6W, 7W, 9W
G23 LED lamp 3W, 4W, 5W, 6W

Datasheet download here

Add Inquiry