大正節能科技有限公司

4 pin 2G7 LED 5W dulux CFL

2G7 LED, 3W 2G7 LED Cfl

4 pin 2G7 LED 5W dulux CFL

產品型號: ECGsmart 2G7 3W LED Lamp

ECGsmart series LED lamps also known for its excellent electronic ballast compatibility. No fixture rewiring. No ballast bypassing. This version of the ECGsmart 2G7 3W LED Lamp has a 2G7 base with 4 pins next to each other. The LED lamps work on an ...
加入詢問
產品特色

ECGsmart series LED lamps also known for its excellent electronic ballast compatibility. No fixture rewiring. No ballast bypassing. This version of the ECGsmart 2G7 3W LED Lamp has a 2G7 base with 4 pins next to each other. The LED lamps work on an electronic ballast and are available in multiple colors. Use lower wattage for better energy saving. Direct replacement makes sure the installation can be kept as usual.

ECGsmart 2G7 series LED bulbs are only suitable for operation on electronic and conventional control gear and not applicable to AC mains (85V~265V) or conventional control gear (CCG).

(Model: ECGsmart 2G7 3W LED Lamp)
Directly replace old 2G7 5W PLS or DULUX S/E compact fluorescent lamp
Work with electronic control gear in existing luminaire.
Save more on energy consumption
Good color consistency quality of light
Excellent lumen efficaby
Long service life up to 50000 hours
No bending with high quality aluminum housing
No mercury or hazardous materials
Note: Not applicable to AC mains (85V~265V) or conventional control gear (CCG).

ECGsmart series LED lamps also known for its excellent electronic ballast compatibility. No fixture rewiring. No ballast bypassing. This version of the ECGsmart 2G7 3W LED Lamp has a 2G7 base with 4 pins next to each other. The LED lamps work on an electronic ballast and are available in multiple colors. Use lower wattage for better energy saving. Direct replacement makes sure the installation can be kept as usual.

ECGsmart series 2G7 LED bulbs also function with external dimmable or non-dimmable LED driver so as to help transition towards the full LED lighting era. The transition between ECG and LED driver is seamless and painless, which will allow the existing fixture to stay and be reused in the current application. ECGsmart 2G7 series LED bulbs are not applicable to AC mains (85V~265V) or conventional control gear (CCG). If you need direct mains voltage for 4 pin 2G7 LED bulbs, please check out our AC-in 2G7 LED series.

If you have any questions, more than welcome to contact with our lighting specialist to know more about our electronic ballast compatible LED solutions.

規格表
Descriptions Value
Direct Replacement Target Old 2G7 5W DULUX F lamp
Driver Compatibility Electronic ballast, LED driver
Ballast Driving Voltage Upon ballast output
CC LED Driver Output Voltage 20V DC
CC LED Driver Output Current 160mA DC
Wattage 3W
Conventional Wattage Equivalent 5W PLS or DULUX S/E CFL
Base Cap 4 pin 2G7
Life Span (Hours) 50000 hrs
Beam Angle (Degrees) 140
Lumens per Watt 130 lm/W
Lumens 420 lm
End cap type Aluminum or plastic
PC cover Clear / Milky
Length 89 mm
Color Rendering Index (CRI) Ra > 82
Color Temperature (CCT) 2700K ~ 6000K
規格表
Order number Direct Retrofit Target
ES-2G7-3W27K-AL 4 pin 2G7 5W 2700K Fluorescent DULUX S/E CFL
ES-2G7-3W30K-AL 4 pin 2G7 5W 3000K Fluorescent DULUX S/E CFL
ES-2G7-3W40K-AL 4 pin 2G7 5W 4000K Fluorescent DULUX S/E CFL
ES-2G7-3W50K-AL 4 pin 2G7 5W 5000K Fluorescent DULUX S/E CFL
ES-2G7-3W60K-AL 4 pin 2G7 5W 6000K Fluorescent DULUX S/E CFL