大正節能科技有限公司

LED lamp 4 pin 2G7 11W dulux SE

2G7 LED, 6W 2G7 LED Lamp

LED lamp 4 pin 2G7 11W dulux SE

產品型號: ECGsmart 2G7 6W LED Lamp

It’s time to take advantage of latest ballast compatible technoloty. Our electronic ballast compatible design in LED lamp can help directly retrofit old 4 pin PLS CFL with ease. No rewiring for fixture. No bypassing to ballast. We have developed complete ...
加入詢問
產品特色

It’s time to take advantage of latest ballast compatible technoloty. Our electronic ballast compatible design in LED lamp can help directly retrofit old 4 pin PLS CFL with ease. No rewiring for fixture. No bypassing to ballast. We have developed complete LED solutions towards old 4 pin PLS CFL. Among them, our ECGsmart 2G7 6W LED lamp can instantly substitute old 4 pin PL-S, Dulux SE or Biax SE 11W CFL. The LED CFL lamps are available in various correlated color temperature (CCT). Furthermore, the ECGsmart can also work with LED driver or dimmable LED driver. With this amazing capability, the fixture always can be reused because the old ballast can be replaced with off-the-shelf LED driver.

(Model: ECGsmart 2G7 6W LED Lamp)
Directly replace old 4 pin cap PL-S, Dulux SE or Biax SE 11W CFL
Work with ECG ballast in existing luminaire.
Work with off-the-shelf LED driver.
Much safer with built-in fuse protection
Safety with over current protection, over temperature protection,
Extremely energy-saving
Long service life of up to 50,000 hours
New innovative design
Good Heat Dissipation
No hazardous substances and RoHS compliant.
Note: not suitable for working with AC mains (85V~265V).

It’s time to take advantage of latest ballast compatible technology. Our electronic ballast compatible design in LED lamp can help directly retrofit old 4 pin PLS CFL with ease. No rewiring for fixture. No bypassing to ballast. We have developed complete LED solutions towards old 4 pin PLS CFL. Among them, our ECGsmart 2G7 6W LED lamp can instantly substitute old 4 pin PL-S, Dulux SE or Biax SE 11W CFL. The LED CFL lamps are available in various correlated color temperature (CCT). Furthermore, the ECGsmart can also work with LED driver or dimmable LED driver. With this amazing capability, the fixture always can be reused because the old ballast can be replaced with off-the-shelf LED driver.

ECGsmart 2G7 series LED bulbs can operate on both electronic gear and external LED driver. With built-in fuse protection, over current protection, over temperature protection, electric arc as well as spark prevention, the safety of ballast compatible LED CFL can be guaranteed.

ECGsmart 2G7 series LED bulbs are not applicable to AC mains voltage (85V~265V) or magnetic ballast (CCG). In case you need 2G7LED solutions for connection with direct mains voltage, please check out our AC-in 2G7 LED series. If you have any questions or you are interested in other products, more than welcome to contact with our lighting specialist. We will to know more about our electronic ballast compatible LED solutions.

規格表
Descriptions Value
Direct Replacement Target Old 2G7 11W DULUX S/E lamp
Driver Compatibility Electronic ballast, LED driver
Ballast Driving Voltage Upon ballast output
CC LED Driver Output Voltage 28V DC
CC LED Driver Output Current 160mA DC
Wattage 6W
Conventional Wattage Equivalent 11W DULUX S/E CFL
Base Cap 4 pin 2G7
Life Span (Hours) 50000 hrs
Beam Angle (Degrees) 140
Lumens per Watt 130 lm/W
Lumens 780 lm
Cap material plastic
PC cover material Clear / Milky
Dimension 189 mm(L)*34 mm(W)
CRI > 82
CCT 2700K ~ 6000K
規格表
Order number Direct Retrofit Target
ES-2G7-6W27K-AL conventional 4 pin 2G7 11W 2700K DULUX S/E CFL
ES-2G7-6W30K-AL conventional 4 pin 2G7 11W 3000K DULUX S/E CFL
ES-2G7-6W40K-AL conventional 4 pin 2G7 11W 4000K DULUX S/E CFL
ES-2G7-6W50K-AL conventional 4 pin 2G7 11W 5000K DULUX S/E CFL
ES-2G7-6W60K-AL conventional 4 pin 2G7 11W 6000K DULUX S/E CFL
注意事項
.Be installed or replaced only by a qualified electrician and lighting technician.
.Switch off all power to fixture before executing any inspection, installation, maintenance, or removal.
.Remember to connect fixture or its LED driver/ballast to ground.
.Operate in fixtures that provide the free flow of air around the lamp. In enclosed fixtures, ensure the lamp has enough space for heat dissipation. This will ensure lumen maintenance and extend its service life.